NOVABLAST- GREEN BLAST TECHNOLOGY- NON EXPLOSIVE-
ENVIRONMENTAL FRIENDLY-SAFE & EASY TO USE
NOVABLAST works on a
simple engineering principle,"fractures follow the path of least resistance". The path of least
resistance is created by a hole pattern drilled in the rock or concrete.
NOVABLAST is simple to
prepare, just add water and mix to desired consistency. Pour the NOVABLAST mix into the
drill holes and leave to set.
NOVABLAST progressively
expands to a pressure of 19,000psi, inducing fractures between the drill holes
due to the build up of stress in the rock or concrete.
Depending on the type
of rock or concrete you will be able to use a mechanical excavation method
within 24hrs to remove the excess rock or concrete.
PLEASE VISIT OUR WEBSITE-
www.novablast.in
|
What is Non-explosive demolition / cracking
agent (Brand: NOVABLAST)
◆ Non-explosive demolition /
cracking agent is a soundless and safe demolition agent which is quite
different from ordinary demolition agents such as explosives and dangerous
materials. It does not cause any fly rock, noise, ground vibration, gas, dust
or any other environmental pollution when used properly.
As requirements for demolishing rock and
reinforced concrete in construction increase in tight quarters, the use of
explosives and explosive agents is becoming more restricted as far as safety
and environmental pollution problems are concerned. Non-explosive demolition
/ cracking agent is the solution.
◆ Non-explosive demolition /
cracking agent is a powder with amazing 18,000 PSI expansive strength when
mixed with common water. Poured into holes, Non-explosive demolition /
cracking agent breaks reinforced concrete & rock safely and quietly,
while providing SILENT cracking.
◆ Since Non-explosive
demolition / cracking agent provides controlled demolition according to
drilling patterns, it is very easy to break reinforced concrete and all kinds
of stone into desired sizes and shapes, without noise, vibration or
dust.
◆Reinforced Concrete
Demolition & Cutting
In demolition, concrete cutting &
excavating industry, Non-explosive demolition / cracking agent helps you to
break reinforced concrete and rock into chunks, so you may easily cut
off re bar haul it away with a crane or truck without damage
remaining part.
◆Rock Breaking &
Excavation
In mining and quarrying industry,
Non-explosive demolition / cracking agent helps to achieve perfect slabs and
blocks from limestone, onyx, marble, granite or any other type of stone you
are working with. Compares to blasting, Non-explosive demolition / cracking
agent avoids waste of valuable stone, high insurance, costly storage and
labor.
◆Stone Quarrying &
Dimension
Non-explosive demolition / cracking agent can
also be applied along with traditional methods like primer cord, hydraulic
breaker, diamond blade saw and jackhammer to help cut cost, work time and
increase safety, Plus its silent operation, Non-explosive demolition /
cracking agent is perfect for residential, school, hospital and airport
area.
Alternative to Blasting, Breaker,
Jackhammer, Diamond Saw…
◆ Non-explosive demolition /
cracking agent helps your work to become more efficient and cost
effective.
◆Highlights
Amazing 18,000 PSI expansive strength when
mixed with common water.
Easy to use, just mix with water, pour into
holes, then it expands.
Cracks reinforced concrete, limestone,
flagstone, granite, marble and onyx safely and quietly.
An alternative to blasting, diamond sawing
and jack hammering, which is safer, more efficient, works without noise,
vibration, dust by providing silent expansive cracking.
No special permit, insurance, training or
equipment needed.
MSDS (Material Safety Data Sheet) is
available BELOW.
Advantages:
1. Controlled Demolition
2. Dust-free
3. Vibration Free
4.No License Required
5.No Flying Debris
6. Environmental Friendly
7. Silent Operation
8. Rapid Usability
9. Economy
10. Safety for Vicinity
Modal No. : NOVABLAST-SCA
Category : Chemical(Chemical Agent, Chemical Material)
Brand Name : NOVABLAST
Price Terms : (Currency: INR Unit Price : 200 per kg Price Terms : FOB, Port : INDIA )
Packing : powder by inner plastic bag, 5kg/bag, 20kg/carton, one
ton/wood pallet
Payment Terms : L/C,CASH,CHEQUE,D.D/RTGS/NEFT
Delivery Terms : 30 Days
Place Of Origin : INDIA
Minimum Order : 100 KGS
Supply Ability : 2000-3000 tons per month
|
Contact Detail
Company Name :NOVATECH INDIA
Contact Person : CHRISTOPHER JAMES
Designation : MANAGING PARTNER
Office Address :8.C,THIRD FLOOR,
NITHIN ARCADE,
RAMAMURTHY NAGAR SIGNAL
ROAD,
DODDA
BANASAWDI,BANGALORE-560 043.
080-40955994
09243001100
Thank you very
much for your enquiry for rock blasting.
We can take up complete contract or supply of rock cracking
chemicals whichcomes in 5 kgs packets WITH ONE BOX OF 20 KGS
The usage instruction is as follows.
We can take up complete contract or supply of rock cracking
chemicals whichcomes in 5 kgs packets WITH ONE BOX OF 20 KGS
The usage instruction is as follows.
Drilling
1. Drill holes using an air hammer drill and appropriate drill bit
specific to the rock type.
2. Holes should be drilled no further than 30-60cm (1 ft-2ft) apart.
Note. In reinforced concrete recommended no more than 20cm (8") apart.
3. Recommended hole diameter 38mm-50mm (1 1/2" - 2.0") . Depth would
be 70-90% of the way depending on the type of rock/material to
be removed.
Mixing
1. For regular safety reasons and mixing small amounts by Hand, it
is recommendable to use rubber gloves.
2. In a bucket, combine 1.5 Liters of water to one 5kgs bag of
CRACKING MATERIAL .or pour water and CRACKING MATERIAL as a rate of 1.3
units by weight.
3. Mix well, using a drill and paddle is recommended . If mixing
with a stick or other method, make sure powder is completely dissolved into
the water.
Mix to the slurry.
Filling
1. Clean holes before filling using air hose remove excess dust from
drilling.
2. CRACKING slurry should be poured into holes within 10-15 min, after
mixing. Do not fill to the top , only fill the holes about 15mm (1/2" to 1 )
from the top.
3. Mix well and pour into holes while agitating the hole to make sure
no air gaps are in the hole. Example; Using a piece of rod or stick to poke
holes.
4. For Horizontal holes, a grouting pump would be most reliable to pour.
Cracking or Cutting time
The cracks appear in 40-60 min after filling , depending
on the weather, rocks, and concrete type. the cracks become wider within
time
(maximum 48 hours expanding time). NO LICENCE REQUIRED
TO USE IT
kindly INFORM US THE QUANTITY REQUIRED BY YOU SO THAT WE CAN DESPATCH
IMMEDIATELY.
THANKING YOU
SINCERELY
For NOVATECH INDIA
8.C,NITHIN ARCADE,
RAMAMURTHY NAGAR MAIN ROAD,
1. Drill holes using an air hammer drill and appropriate drill bit
specific to the rock type.
2. Holes should be drilled no further than 30-60cm (1 ft-2ft) apart.
Note. In reinforced concrete recommended no more than 20cm (8") apart.
3. Recommended hole diameter 38mm-50mm (1 1/2" - 2.0") . Depth would
be 70-90% of the way depending on the type of rock/material to
be removed.
Mixing
1. For regular safety reasons and mixing small amounts by Hand, it
is recommendable to use rubber gloves.
2. In a bucket, combine 1.5 Liters of water to one 5kgs bag of
CRACKING MATERIAL .or pour water and CRACKING MATERIAL as a rate of 1.3
units by weight.
3. Mix well, using a drill and paddle is recommended . If mixing
with a stick or other method, make sure powder is completely dissolved into
the water.
Mix to the slurry.
Filling
1. Clean holes before filling using air hose remove excess dust from
drilling.
2. CRACKING slurry should be poured into holes within 10-15 min, after
mixing. Do not fill to the top , only fill the holes about 15mm (1/2" to 1 )
from the top.
3. Mix well and pour into holes while agitating the hole to make sure
no air gaps are in the hole. Example; Using a piece of rod or stick to poke
holes.
4. For Horizontal holes, a grouting pump would be most reliable to pour.
Cracking or Cutting time
The cracks appear in 40-60 min after filling , depending
on the weather, rocks, and concrete type. the cracks become wider within
time
(maximum 48 hours expanding time). NO LICENCE REQUIRED
TO USE IT
kindly INFORM US THE QUANTITY REQUIRED BY YOU SO THAT WE CAN DESPATCH
IMMEDIATELY.
THANKING YOU
SINCERELY
For NOVATECH INDIA
8.C,NITHIN ARCADE,
RAMAMURTHY NAGAR MAIN ROAD,
DODDA BANASAWADI,
BANGALORE-560043
PHONE-080-40955994
MOBILE-09343778229
BANGALORE-560043
PHONE-080-40955994
MOBILE-09343778229
No comments:
Post a Comment